18
5 ALARM
5.1 Alarm indication
WARNING!
If the disinfection process is cancelled, the goods
are not clean. The goods must be processed
again.
If the red lamp at
lights up, the disinfection has been aborted.
The display shows an error message, see "Troubleshooting".
5.2 Acknowledgement of error message
WARNING!
Only to be carried out by authorized staff.
Some error messages need to be acknowledged before the
machine can be returned to run mode. When the cause of the
error has been found and the error has been put right, the error
message is acknowledged as follows:
First press the
button, then the button. Keep both buttons
pressed at the same time for 5 seconds. If the error has not been
corrected, the error message cannot be acknowledged. The
machine is now ready to operate. Re-run the aborted program to
disinfect the items. If the error persists, call service personnel.
5.3 During a power failure
If the power fails during a process, the machine remains locked.
When the power returns, the machine restarts the process
automatically.
To Next Page
Loading...
