Arjo Ninjo - Isolator Switch Requirements; Emergency Procedures; Attention Symbols and Warnings

7
1.2 Isolator switch
The machine must always be equipped with a separate isolator
switch in the feed power supply. The isolator switch must be easily
accessible on a wall close to the machine. The external electrical
isolator switch must be marked “I” and “O” to identify the position
of the switch.
1.3 In an emergency
• Switch off the main switch.
• Close shutoff valves in the water and any steam supply lines.
1.4 Product liability
CE marking indicating conformity with European Community
harmonised legislation.
$Q\PRGL¿FDWLRQRULQFRUUHFWXVHRIWKHHTXLSPHQWZLWKRXWWKH
approval of Arjo negates Arjo’s product liability.
CE marking indicating conformity with European
Community harmonised legislation
)LJXUHVLQGLFDWH1RWL¿HG%RG\VXSHUYLVLRQ
Indicates the product is a Medical Device
according to EU Medical Device Regulation
2017/745
1.5 Attention symbols
There are warnings, instructions, and advice in this manual that
require extra attention. The symbols and designs used are:
Risk of injuries or machine damage.
Hot surface. Risk of injury.