Arjo Ninjo - 9 Environmental Product Declaration; Comments; Distribution; Use

24
9 ENVIRONMENTAL PRODUCT DECLARATION
Plastic Stainless steel
FD1600 FD1605 UB FD1610 FD1615 UB
Total weight kg / %
by weight
90 / 100 65 / 100 100/ 100 75 / 100
Mechanical parts
Stainless steel 41 / 45.5 21 / 32.3 60 / 60 35 / 46.6
Steel 1 / 1.1 1 / 1.5 1 / 1 1 / 1.3
Cast iron 13 / 14.4 13 / 20 13 / 13 13 / 17.3
Copper 1 / 1.1 1 / 1.5 1 / 1 1 / 1.3
Plastic 25 / 27.7 25 / 38.4 16 / 16 16 / 21.3
Rubber 3 / 3.3 3 / 4.6 3 / 3 3 / 4
Other mech. parts 2 / 2.2 2 / 3 2 / 2 2 / 2.6
Electrical / Electronics
Wiring 1 / 1.1 1 / 1.5 1 / 1 1 / 1.3
Circuit boards 0.2 / 0.2 0.2 / 0.3 0.2 / 0.2 0.2 / 0.3
Other components 2.8 / 3.1 2.8 / 4.3 2.8 / 2.8 2.8 / 3.7
9.1 Comments
Other components consists of pumps, door motors, etc. which
cannot be weighed or divided up in the same way as other parts.
There is no mercury in the machine or its components.
9.2 Distribution
The machines are packed on wooden pallets and clad with
corrugated cardboard, or wrapped in plastic. Users must make
sure that the packaging material is sorted and recycled.
9.3 Use
7KHÀXVKHUGLVLQIHFWRUDIIHFWVWKHHQYLURQPHQWGXULQJLWVHQWLUH
life cycle. Our assessment is that electric power and water
consumption have the greatest impact on the environment. In
total during the lifecycle the machines use approx 11000 kWh of
electricity and approx 1300 m³ of water. A total of approx 210 liters
of detergent are released into the drainage system, dependent on
the programs/dosages of the machine.