25
Preventive Maintenance Schedule
The equipment is subjected to wear and tear, and the following maintenance instructions must
be acted upon when specified to ensure that the equipment remains within its original
manufacturing specifications. Care and maintenance must be carried out in accordance with
the preventive maintenance schedule below.
Customer obligations must be carried out by qualified personnel in accordance with the
instructions in this manual.
User Inspections
Action/check Before every use Every week Every year
Transport device
Carry out a visual inspection of all external
parts. All functions must be tested for cor-
rect operation to ensure that no damage has
occurred during previous use.
X
Inspect for missing hardware or broken
parts.
X X
Inspect the sling lugs on the lift for damage
or cracks.
X
Ensure that the castors are firmly secured
to the chassis.
X
Make sure all castors rotate freely and the
two rear brakes lock.
X
Check front and rear castors regularly for
hair and debris; clean when necessary.
X
WARNING: The maintenance described in the following checklist is the minimum that
the manufacturer recommends. In some cases more frequent inspections should be
carried out. Continuing to use this equipment without conducting regular inspections
or when a fault is found will seriously compromise the safety of the user and of the
patient. Local regulations and standards may be higher than those of the manufacturer.
Service and preventive maintenance can be arranged with the manufacturer. Preventive
maintenance specified in this manual can prevent accidents and reduce repair costs.
WARNING: Safety related maintenance and authorized service must be carried out by
qualified personnel, fully trained in servicing procedures by Arjo, and equipped with
correct tools. Failure to meet these requirements could result in personal injuries and/
or unsafe equipment.
Care and Maintenance
To Next Page
Loading...