What to do if Arjohuntleigh citadel shows errors in indicated patient weight?
If you are experiencing errors in indicated patient weight with your Arjohuntleigh Medical Equipment, check that the deck is not touching furniture, curtains, or cables. Also, ensure that weight has not been added to the bed without using the auto compensation function. Try raising the bed from its lowest position.
What to do if Arjohuntleigh Medical Equipment displays error code E300?
If your Arjohuntleigh Medical Equipment displays error code E300, it means a control button has been depressed for more than 90 seconds. Remove pressure from all control buttons. If the error code persists, contact an ArjoHuntleigh approved service agent.
Why is there an audible tone when using the Arjohuntleigh bed?
An audible tone during operation of the Arjohuntleigh bed indicates that it is running on the backup battery. Ensure the power supply cord is properly plugged in and the electricity supply is functioning. Check the fuse in the mains plug, if applicable.
What to do if my Arjohuntleigh Medical Equipment alarm sounds when patient moves?
If the alarm sounds when a patient moves on the Arjohuntleigh Medical Equipment, the movement detection threshold might be set too low. Increase the VariZone patient movement detection threshold setting.
What to do if Arjohuntleigh citadel Medical Equipment deck cannot be lowered and shows error code AES?
If the deck of your Arjohuntleigh Medical Equipment cannot be lowered and displays error code AES, the Anti-Entrapment system has been activated. Remove any obstructions from below the deck. If the bed still cannot be lowered, contact an ArjoHuntleigh approved service agent.
What to do if one or more Arjohuntleigh bed functions are inoperative?
If one or more functions of your Arjohuntleigh bed are not working, it could be that the function(s) are locked on the ACP. Try unlocking the function(s) on the ACP.
Why is Arjohuntleigh Medical Equipment difficult to maneuver?
If your Arjohuntleigh Medical Equipment is hard to move, the brake pedal might be in the steer position. Place the brake pedals in the free position.
What to do if Arjohuntleigh citadel deck cannot be lowered?
If the deck of your Arjohuntleigh Medical Equipment cannot be lowered, it could be due to a height control software error. Raise the deck to its maximum height to reset the software.
What does it mean if Arjohuntleigh Medical Equipment displays error code E410?
If your Arjohuntleigh Medical Equipment shows error code E410, it indicates a service error. Contact an ArjoHuntleigh approved service agent.
What to do if Arjohuntleigh citadel mattress control unit will not power up?
If the mattress control unit doesn't power up, ensure the AC power cable from the frame is connected to the air mattress control unit. Also, check and replace the blown fuse on the back of the mattress control unit. Finally, verify that the bed frame power cord is plugged into an AC outlet.
Detailed diagram and list of bed components and their labels for identification.
Specifies intended use, indications, and contraindications for patient use.
Details the safe working load and maximum patient weight capacity of the bed.
Instructions for preparing the weighing system, including removing transport bolts.
Guidelines for connecting, storing, and handling the power cord safely.
Details the various electrical connection points and terminals on the bed frame.
Instructions and warnings for connecting nurse call and RS232 cables correctly.
Information on auxiliary power outlet and Skin IQ power cable.
Guidelines for selecting and using appropriate mattresses with the bed.
Explains the visual indicators for four safety-critical bed parameters.
Details indicated by the mattress size label and valve cover usage.
Details the locations of sockets for lifting poles and other accessories.
Instructions on how to adjust the bed's length for transport or patient needs.
Step-by-step guide on how to extend the bed frame and deck.
Explains the operation of bed brakes and steering casters.
Instructions on how to lower and raise the side rails for patient safety.
Details on the proper use, compliance, and attachment of patient restraints.
Information on the under bed light and its operation via the control panel.
Explains battery indicators and how the backup battery powers the bed.
Describes the lockout function and battery recharge procedures.
Details controls for deck/backrest and explanations of key indicators.
Explains CPR function and how to lock/unlock bed controls.
Instructions for using nurse call and automated chair positioning.
Advice on using handsets and managing the handset cable.
Explains display, weigh, zero, units, and mute functions of the scale panel.
Lists precautions to ensure accurate weighing system performance.
Detailed steps to calculate and display the patient's weight.
Explains how to add or remove weight without altering the indicated patient weight.
Detailed table of weighing system error codes, their descriptions, and actions.
Explains VariZone controls and how to adjust detection sensitivity.
Steps to activate and adjust the VariZone detection thresholds.
Details the infrared sensors and how the anti-entrapment system functions.
Explains the indicator panel and four safety parameters monitored by SafeSet.
How to turn the SafeSet indicator lights on or off using a key fob.
Lists the type of data transmitted and its frequency via RS232.
Details the function of each button for TV and lighting controls.
Essential steps before placing patient, including bed setup and safety checks.
Setting VariZone sensitivity, bed height, and locking functions.
Step-by-step guide to place the bed into the CPR position.
Instructions for patient bathing, including safety and cleaning advice.
Guidelines for safely transporting the bed with a patient on board.
Instructions for deck sections and guidelines for decontamination.
Recommended methods and solutions for disinfecting the bed.
Procedures for cleaning the bed during patient use and between patients.
List of daily and weekly checks for caregivers to perform.
Procedure to test the backup battery and calibrate the weighing system.
Possible causes and actions for inoperative functions or maneuverability issues.
Possible causes and actions for errors in patient weight and nurse call function.
Detailed table of weighing system error codes, their descriptions, and actions.
Explains fault indications on the Attendant Control Panel and potential causes.
Details on electromagnetic emissions and guidance for the bed's use.
Details on electromagnetic immunity and guidance for voltage variations.
Recommended separation distances for RF communications equipment.
How to contact for service, maintenance, and spare parts.
Specifies weighing system capacity and mattress size details.
Guidelines for the safe transport and storage of the bed.
Provides contact details for ArjoHuntleigh offices worldwide for product support.
General| Bed Height (Highest) | 81 cm (32 in) |
|---|---|
| Cardiac Chair | Yes |
| Bed Length (Extended) | 2340 mm |
| Bed Width | 1030 mm |
| Bed Height (Lowest) | 320 mm |
| Trendelenburg/Reverse Trendelenburg | +/- 16 degrees |
| X-Ray Capability | Yes |
| Type | Bariatric Bed |
| Maximum Weight Capacity | 250 kg |
| Lift Range | 500 mm |
| Power Supply | 120V AC, 60Hz |
| Width | 1030 mm |
| Length | 218 cm (86 in) |
| Wheel Type | Locking Casters |
To Next Page
