What to do if I get a warning of high temperature for goods in my Arjohuntleigh Ninjo?
If you receive a high temperature warning for the goods in your Arjohuntleigh Medical Equipment, allow the goods to cool down.
What to do if the Arjohuntleigh Medical Equipment displays an inactivity warning?
If your Arjohuntleigh Medical Equipment shows an inactivity warning, it means the machine has been inactive for 72 hours. You must run a program with an empty chamber before using the machine to clean goods.
What to do if I attempt to start Arjohuntleigh Ninjo Medical Equipment with the door open?
If you attempt to start the Arjohuntleigh Medical Equipment with the door open, simply close the door.
What to do if I cannot lock the door of my Arjohuntleigh Ninjo Medical Equipment?
If you cannot lock the door of your Arjohuntleigh Medical Equipment, acknowledge the error, ensure the door is correctly closed, and then try starting again.
How to fix lime descaler low level in Arjohuntleigh Medical Equipment?
To resolve a low lime descaler level in your Arjohuntleigh Medical Equipment, top up the descaler agent.
How to fix process agent low level in Arjohuntleigh Ninjo Medical Equipment?
To fix a low process agent level in your Arjohuntleigh Medical Equipment, simply top up the process agent.
How to fix rinse-aid low level in Arjohuntleigh Ninjo Medical Equipment?
If the rinse-aid level is low in your Arjohuntleigh Medical Equipment, top up the rinse-aid.
Lists the different models of the Ninjo flusher-disinfector available.
Crucial warnings and guidelines to avoid injury and ensure safe operation of the machine.
Details the requirement and location of the machine's isolator switch.
Actions to take in case of an emergency involving the machine.
Information regarding product compliance and potential liability issues.
Explanation of warning and informational symbols used throughout the manual.
Describes the intended use of the flusher-disinfector for cleaning containers.
Illustrates and identifies the different types of Ninjo machine models.
Details the components and functions of the machine's control panel.
Configurable display settings for program status and post-program information.
Description of the machine's standard programs and their parameters.
Step-by-step guide on how to start and operate programs on the machine.
Information on handling errors during a program and post-completion procedures.
Details the cooling and ventilation process after disinfection.
Visual examples of loading items and selecting appropriate programs.
Procedure for removing limescale deposits from the flushing chamber.
Instructions for cleaning and disinfecting the machine's exterior surfaces.
Guidelines for regular checks and system testing to ensure machine safety and operation.
Detailed schedule of recommended maintenance tasks and intervals.
Procedure for draining the machine when it is not being used.
Explanation of the machine's visual and audible alarm signals.
Procedure for acknowledging and clearing error messages by authorized staff.
How the machine behaves and restarts after a power interruption.
A list of error codes, their descriptions, and suggested measures.
Defines the different categories of codes (information, handling, error).
Guidelines and warnings for using appropriate detergents with the machine.
Details on recommended detergents for flushing and rinsing the machine.
Illustrates the correct placement of detergent containers for the machine.
Procedure for replacing detergent containers and checking connections.
Compatibility requirements for water used in all stages of the cleaning process.
Discusses main factors affecting water quality: hardness, contaminants, and chemicals.
ArjoHuntleigh's recommendations for drinking water quality for machine use.
Guidance on adhering to local standards, especially for treated water.
Provides a typical specification for treated water including pH, conductivity, and micro-organisms.
Details the material composition of machine parts by weight.
Information on how machines are packed and distributed, and recycling advice.
Assessment of the environmental impact of the machine during its lifecycle.
Instructions for recycling machine components and handling hazardous materials.
Details on the manufacturing and labeling of machine pallets according to ISPM15.
General| Brand | Arjohuntleigh |
|---|---|
| Model | Ninjo |
| Category | Medical Equipment |
| Language | English |
To Next Page