How to fix Arjohuntleigh Lifting Systems hand control not responding?
If the hand control on your Arjohuntleigh Lifting Systems isn't responding, begin by checking the red emergency stop button located on the control box. Then, inspect the connector on the hand control cord to ensure it's properly connected. Finally, verify the battery condition and replace it with a fully charged battery pack if necessary.
What to do if Arjohuntleigh MAXI LITE Lifting Systems actuator does not respond?
If the actuator of your Arjohuntleigh Lifting Systems isn't responding, first check the red emergency stop button on the control box. Next, ensure the battery is correctly installed and fully charged; try a new, fully charged battery pack to test. Also, check the hand control connection. Finally, verify that the control box isn't in automatic cut-out mode by ensuring the boom isn't obstructed or overloaded.
Why UP and DOWN buttons on Arjohuntleigh MAXI LITE control box do not respond?
If the UP and DOWN buttons on the control box of your Arjohuntleigh Lifting Systems are unresponsive, check the red emergency stop button on the control box. Also, check the battery condition and replace it with a fully charged battery pack.
What to do if Arjohuntleigh Lifting Systems actuator stalls during lift?
If your Arjohuntleigh Lifting Systems actuator stalls during a lift, replace the battery with a freshly charged one. Also, ensure that you are not exceeding the lifting capacity of the system.
What does beep sound from Arjohuntleigh MAXI LITE control box mean?
If you hear an audible “beep” from the control box of your Arjohuntleigh Lifting Systems, replace the battery pack with a freshly charged one.
General| Brand | Arjohuntleigh |
|---|---|
| Model | MAXI LITE |
| Category | Lifting Systems |
| Language | English |
To Next Page