What to do if the actuator 'stalls' during lift on Arjohuntleigh Maxi 500 Medical Equipment?
If the actuator 'stalls' during lifting with your Arjohuntleigh Medical Equipment, try the following: 1. Replace the battery pack with a fully charged one. 2. Ensure that you are not exceeding the lifting capacity.
What to do if the battery pack indicates it is fully charged but the Arjohuntleigh Maxi 500 Medical Equipment lift only works a few times?
If the battery pack shows fully charged when in the charger, but the Arjohuntleigh Medical Equipment lift only performs a few lifts, replace the internal batteries.
What to do if the hand control does not respond on Arjohuntleigh Medical Equipment?
If the hand control of your Arjohuntleigh Medical Equipment is unresponsive, try the following: * Check the red emergency stop button on the control box. * Verify the connection of the hand control cable. * Ensure the battery pack is correctly installed and fully charged. * Test with a new, fully charged battery pack.
What to do if the UP and DOWN buttons on the control box do not respond on Arjohuntleigh Maxi 500 Medical Equipment?
If the UP and DOWN buttons on the control box of your Arjohuntleigh Medical Equipment aren't working, make sure to: * Check the red emergency stop button on the control box. * Confirm the battery pack is correctly installed and fully charged. * Test with a new, fully charged battery pack.
What to do if the actuator does not respond on Arjohuntleigh Maxi 500?
If the actuator on your Arjohuntleigh Medical Equipment is not responding, try these steps: * Check the red emergency stop button on the control box. * Ensure the battery pack is correctly installed and fully charged. * Test with a new, fully charged battery pack. * Verify the hand control is connected. * Check the actuator is connected to the control box.
Why is my Arjohuntleigh Maxi 500 control box beeping?
If you hear an audible 'beep' from the control box of your Arjohuntleigh Medical Equipment, replace the battery pack with a fully charged one.
What to do if the 'Power on' light on the Arjohuntleigh Medical Equipment charger is not lit?
If the 'Power on' light on your Arjohuntleigh Medical Equipment charger is not lit, check to ensure the charger is properly plugged into an electrical wall outlet.
What to do if the charger is plugged in, but the “Power on” light is not lit on Arjohuntleigh Maxi 500 Medical Equipment?
If the charger is plugged in but the “Power on” light remains off on your Arjohuntleigh Medical Equipment, verify that there is power at the wall outlet.
Guidance for technicians to assess risks before performing any service or repair.
Visual guide to inspection points for annual maintenance checks.
Steps to verify the condition and functionality of the battery and charger.
Tests all functions of the lift to ensure proper operation and safety.
Verifies the functionality of the anti-crush safety feature.
Detailed procedure for replacing the leg actuator.
Guide on how to replace the lift legs, including necessary steps and warnings.
Procedure for calibrating the digital scale, including different processes.
Procedure for performing a safe working load test on the lift.
Details compliance with regulatory standards for blocking EMI from external sources.
Information on RF emissions, harmonic emissions, and voltage fluctuations.
Specifies immunity levels to electrostatic discharge, electrical fast transient, surge, and power frequency magnetic fields.
General| Brand | Arjohuntleigh |
|---|---|
| Model | Maxi 500 |
| Category | Medical Equipment |
| Language | English |
To Next Page
