4
Connect the sling loops or
clips to the spreader bar.
1
Place the sling around the
patient. For sling with head
support make sure it extends
to top of patient’s head.
2
Approach the lift. Place spreader
bar at shoulder level and close
enough to attach shoulder
straps.
Attach and secure the
clip at the lug before
patient is lifted.
3
Place attachment
loop on the hook.
Make sure that the
safety latch is
closed.
Clip sling
Loop sling
For the DPS spreader bar and clip sling,
tilt the spreader bar to attach the leg
clips.
5
6
Raise the patient.
8
Lower until no tension. Detach
loops or clips.
Move the patient.
7
001-15772-EN Rev 0 • 05/2020 • Page 1/4
QUICK REFERENCE GUIDE - USE
Maxi Sky 2
Transfer from seated position
To Next Page
Need help?
General
