Arkon MAG 910 - Page 43

Electromagnetic flowmeter M910
Operation manual
43
Auxiliary volume counter Reset
CLRAV
Command resets “Auxiliary volume counter”.
M910 confirms execution with string „Ok<cr>”.
Example:
Command „CLRAV<cr>” resets the Auxiliary volume counter.
Min. / Max. flowrates Reset
CLRMM
Command resets “Min. Flowrate” and “Min. Flowrate” values.
M910 confirms execution with string „Ok<cr>”.
Example:
Command „CLRMM<cr>” resets both min/max values.
Flowrate reading
RFL?
Response contains actual “Flowrate” value in selected units.
Example:
If query „RFL?<cr>” is sent, flowmeter returns response in format „100.000<cr>“. Resolution is designed by Setup
menu.
Volume reading
RVO?
Response contains actual “Volume” counter value in selected units.
Example:
If query „RVO?<cr>” is sent, flowmeter returns response in format „100.000<cr>“. Resolution is designed by
Setup menu.
Positive volume reading
RVP?
Response contains actual Positive volume counter value.
Example:
If query „RVP?<cr>” is sent, flowmeter returns response in format „100.000<cr>“. Resolution is designed by
Setup menu.
Negative volume reading
RVN?
Response contains actual Negative volume counter value.
Example:
If query „RVN?<cr>” is sent, flowmeter returns response in format „-100.000<cr>“. Resolution is designed by
Setup menu.