4.3
Maintenance of the instrument when it will not be used for a long period
AE-4022 4-15
4.3
Maintenance of the instrument when it will not be used for a long period
If the instrument will not be used for a period longer than one week, maintain it by following the procedures below.
Items required: Alcohol, cloth, and protective gloves
1 Turn the power switch OFF
a Check that the [Standby screen] is displayed, and then turn the
power switch OFF.
2 Clean the feeder
a Sterilize and clean the carrying arm, test strip tray, suction ports,
and test strip feed tray, following the instructions in “4.1.1.
Cleaning the feeder” on page 4-2.
3 Clean the waste box
a Clean the waste box, following the instructions in “4.1.2.
Cleaning the waste box” on page 4-10.
Wear protective gloves to prevent exposure to pathogenic microorganisms.
Discard used test strips in accordance with local regulations for biohazardous waste.
Carrying arm
Test strip tray
Test strip feed tray
Suction ports
Waste box
To Next Page
Loading...
