Chapter 3
Target board design
When you design a target board to connect to the DSTREAM-ST unit, you must consider the rules that
are discussed in this chapter.
It contains the following sections:
• 3.1 Overview of high-speed design on page 3-48.
• 3.2 JTAG port buffering on page 3-51.
• 3.3 Series termination on page 3-54.
• 3.4 Modeling on page 3-55.
• 3.5 Target design checklist on page 3-56.
100893_0100_06_en Copyright © 2017–2019 Arm Limited or its affiliates. All rights
reserved.
3-47
Non-Confidential
To Next Page
Loading...
