ARM DSTREAM-ST - Auxiliary (AUX) connector

2.9 Auxiliary (AUX) connector
The Auxiliary (AUX) connector on the front of DSTREAM-ST is reserved for future use and is intended
to support external probes for high-speed trace capture (for example, 32-bit, HSSTP, or PCIe).
Warning
This connector is not intended for user I/O. Do not attempt to connect anything other than Arm
DSTREAM-ST probes.
This connector is not compatible with older RealView Trace (RVT) probes.
2 Target interface connectors
2.9 Auxiliary (AUX) connector
100893_0100_06_en Copyright © 2017–2019 Arm Limited or its affiliates. All rights
reserved.
2-45
Non-Confidential