ARMODD Roundz 3 - Technical Support

84
EN
completely and then use a knife to remove the display carefully.
One by one, cut the wires to the battery and remove battery
carefully so as to avoid damage to the battery and electrolyte
leakage. Use the proper PPE and follow the applicable
occupational health and safety rules to avoid injuries.
Electronic waste
Leave the product at a dedicated electronic waste collection
facility where its recycling or safe disposal is ensured. Contact
your local municipality for a list of waste collection sites, or you
can leave the used product with the seller.
Declaration of Conformity
SMARTOMAT s.r.o. hereby declares that the ARMODD Roundz 3
device complies with Directive2014/53/EU. The full version of the
EU declaration of conformity is available at this website:
www.armodd.com
Technical support
Do you have any questions regarding your product?
Do not hesitate to contact us.
e-mail: info@armodd.com
www.armodd.com
Manufacturer:
SMARTOMAT s.r.o., 1.máje 97, 460 02 Liberec, Česká republika