Armstrong 4360 - Page 11

installation &
operating instructions
Commercial pumps Series 4300, 4360 and 4380
Vertical In–Line pump
11
fig. 2.3 Discharge elbow for minimum footprint.
fig. 2.5 Floor saddle support.
fig. 2.4 With additional pipe supports.
fig. 2.6 Additional floor support.
Recommended field
pressure gauge pip-
ing arrangement
Suction
guide
Drain connection
Hangers support the weight
of the filled piping, pumps
and fittings
System outlet
System inlet
Split coupler
Pipe hanger (typ.)
See specification
for size and type
Flo-Trex valve
Flush line
Pipe support
Drain connection
Recommended field
pressure gauge
piping arrangement
Neoprene
isolation pad
Suction
guide
Hangers support the weight
of the filled piping, pumps
and fittings
System outlet
System inlet
Split
coupler
Pipe hanger (typ.)
See specification
for size and type
Flo-Trex valve
Flush line
2' or 3'
height above
finished floor
Flo-Trex valve
Gap