To Next PageTo Next Page
Need help?Do you have a question about the Armstrong The Brain DRV40 and is the answer not in the manual?
General| Brand | Armstrong |
|---|---|
| Model | The Brain DRV40 |
| Category | Control Unit |
| Language | English |
Explains symbols used for safety warnings and precautions.
Provides general installation guidelines, safety warnings, and requirements.
Shows a diagram of the system layout with a legend for components.
Provides a legend for components specific to the DRV40 assembly in the diagram.
Explains how to adjust temperature settings using a laptop or PC.
Introduces the programming software and options for adjusting DRV40 settings.
Shows the current status of the disinfection cycle.
Details the controls for managing the disinfection cycle.
Explains how to enable disinfection and set the timeout feature.
Specifies the temperature for thermal disinfection.
Instructions for using the Abort function to stop the disinfection cycle.
Illustrates the timeline of the disinfection process.
Explains how to set the valve address for multiple DRV40 units on a serial line.
Describes options for connecting to BrainScan® or Modbus networks.
Indicates when valve calibration is necessary and for which parts.
Details the BrainScan® control module and its features.
Explains how the DRV40 can communicate via Modbus RTU.
Provides guidance on sizing and selecting the circulating pump.
Covers safety measures like aquastat linking and alerts.
Explains the role and replacement schedule for batteries.
Recommends replacement intervals for O-rings and seals.
Details cleaning procedures and frequency for supply strainers.
Lists and explains specific error codes and their meanings, including PCB failures.
Lists common operational problems and their potential causes.
