SC-350/SC-360 – User’s Guide – 019223-101 Rev 06
5
Introduction
The SC-350/360 are universal, compact
desktop machines for counting coins and
tokens.
SC-350 has a manual coin tray, SC-360 has
an automatic one.
Place the coins to be counted in the coin
tray. Set the diameter selector and the
thickness selector to the desired position.
See “
Technical Data” on page 17 for min./
max coin diameter and thickness.
After a minor adjustment, the machine can
count tokens with a diameter up to 38 mm,
see “
How to Count Tokens up to 38 mm”
on page 12.
After being counted the coins appear at the
coin outlet where they can be put into
either bags or tubes, depending on the type
of attachment fitted to the machine.
Any rejected coins are routed to the reject cup.
Press the keys on the control panel to select the various modes of
operation.
The machine is equipped with a serial interface, it can be controlled
from a computer. This means that the machine could be used as a
dispenser.
Software Version
This User’s Guide relates to software version 4.03.
Accessories
For information about the accessories available, please contact your
SUZOHAPP representative.
To Next Page
Loading...
Need help?
General