SC-350/SC-360 – User’s Guide – 019223-101 Rev 06
16
>>>
d) Clean the coin track with a brush, or the plastic scraper
provided with the machine.
e) Fit the thickness guide block and the feed mechanism.
f) Close the inspection cover.
Cleaning the out-feed belt
The out-feed belt may require cleaning from time to time.
a) Remove the belt, see “
Exchanging the Out-feed Belt” on
page 15.
b) Clean the belt with a paper towel soaked in alcohol or other
mild degreaser.
c) Fit the feed mechansim and the out-feed belt.
d) Close the inspection cover.