Look Settings 44
Look Duplicate and Rename
► Select MENU > Image > Look > Look.
► Select a look from the list and press DUPLICATE / RENAME.
► Enter a new name and press SET to rename the look, or press DUPLICATE and then SET to
duplicate the look.
Info: The Default look can not be renamed.
Look Export
Look files can be exported to the USB medium to be sent to post production or to be imported on other
cameras.
► Insert the USB medium into the camera.
► Select MENU > Image > Look > Look.
► Select a look from the list and press EXPORT.
The look file is stored in folder ARRI/ALEXA35/LOOKFILES on the USB medium.
10.4 Look Intensity
The Look Intensity adjusts the level of look application to the LogC4 image, where 100% translates to
a fully applied look and 0% to a plain LogC4 image. The look intensity is stored as a metadata in the
ALF4 look file. When the look is loaded, the camera reads the metadata and applies the look intensity
accordingly. In this way, the look intensity of a look can be changed as often as desired.
► Select MENU > Image > Look > Look Intensity to set the look intensity of the active look between
10% and 100%.
Info: The active look is stored in the clip metadata. Here, however, the set intensity is "burned" into the
look file with a recalculated LUT.
To Next Page
