ARRI IVS - Page 63

63
> -SET <> E
-RESET 0107m
EXIT
>
> > > >
>
> -SET <> E
-RESET 0107m
EXIT
>
> > > >
>
> -SET <> E
-RESET 0107m
EXIT
>
>
>
> -SET <> E
-RESET 0107m
>
>
>
SUB MENU
STATUS ON
POSITION
SIZE SMALL
BACK-
GROUND BOXED
IVS-FILM
COUNTER ON
-MODE UP
-PERF 4
EXIT
CAM-DIR FWD
the active digit which is the digit, marked with the ^
symbol.
• The ä key will move the ^ symbol from the first digit
one digit right.
• By pressing the same key, the ^ symbol will continue
to move right to the last digit, which is M for meter or
FT for feet. After that, it will return to the first digit.
• The ö key will move the ^ symbol in the opposite
direction.
• Pressing the ß key will increment the active digit by one.
• Every time the ß key is pressed, the active digit is
incremented from 0 to 9 and back to 0.
The ü key will give the opposite direction.
• If the last digit is selected it is possible to switch
between meter M and feet FT display. Pressing the
ß or ü key will change between the two formats.
•When the desired value has been set, confirm by
pressing the key ENTER INSERT briefly.
Inserter Facilities