ARRI IVS - Page 82

82
SUB MENU
> PULL DN. ON
POSITION
SIZE SMALL
BACK-
GROUND BOXED
EXIT
SUB MENU
PULL DN. ON
> POSITION
SIZE SMALL
BACK-
GROUND BOXED
EXIT
> POSITION<> E
>
>
6.8.1 Pull-Down
This sub menu line switches the insertion of pull-down
information on (ON) and off (OFF) independently from
other inserted data.
• Move the cursor > with the keys ß and ü to the line
PULL DN.. The keys ä and ö switch the
insertion on and off.
6.8.2 Position
The window can be positioned anywhere on the monitor
screen.
• Move the cursor > with the keys ß and ü to the line
POSITION. Activate the positioning mode with
the keys ä or ö. The following menu is displayed on
the screen:
• The keys ö and ä move the window left and right,
the keys ß and ü move the window up and down.
When the desired position has been set, confirm by
pressing the key ENTER INSERT.
Inserter Facilities