93
SUB MENU
VITC ON
POS.1 10
> POS.2 12
EXIT
6.10.3 Position 2
The insertion of VITC can be single or multiple line between
line 6 and 22. If the same lines on position 1 and position 2
are selected, the insertion will be single line, otherwise
multiple line. The value of position 1 can be higher or
lower than that of position 2.
•Move the cursor > with the keys ß and ü to the line
POS. 2. By pressing the key ä the value will be
increased until line 22 is selected. By pressing the
key ö the value will be decreased until line 6 is
reached.
Inserter Facilities
To Next Page
Loading...
