Arris TG3452 - Self-Install Guide Manual

Let’s get started
You’ll need: a device to connect to the Internet WOW! will provide:
coax cable, ethernet cable, wireless router,
router power cord and install guide
Device to connect to the Internet
Router Power Cord
Install Guide
Coax Cable
Wireless Router
Ethernet Cable
1. Connect one end of the coax cable into an available wall outlet in your home and the other end into the
wireless router.
2. Plug the power cord into the wireless router.
3. Allow the wireless router to boot fully and connect to the network. When all lights on the wireless router are solid
and no longer flashing, your router is connected.
Step 1. Connect your wireless router
Helpful Hint: If you would like to directly connect your computer to your wireless router, use the Ethernet cable
provided and plug it from your wireless router to your computer.
2
1
Arris TG3452
Self-Install Guide