14
PRO MPA II SPECIFICATIONS
Frequency Response............................ 15Hz to 48 kHz (+0, -1dB) @ normal plate voltage
15Hz to 120 kHz (+0, -1dB) @ high plate voltage
Dynamic range:..................................... >110dB (“A” weighted)
CMRR: .................................................. >90dB
THD: ..................................................... <0.005% (typical)
Equivalent Input Noise: ......................... -129dBu (XLR, “A” weighted)
Maximum Input Level:........................... +19dBu (cannon)
Maximum Instrument Input:................... +17dBu
Input Impedance ................................... 150-3000 Ohms adjustable (XLR)
>800K Ohms (Instrument)
Maximum Output Level ......................... +27dBu (XLR)
Output Impedance: ............................... < 47 Ohms (XLR)
Maximum Gain...................................... 70dB
Meter Calibration................................... 0 VU = +4dBu output (+4dB mode)
0 VU = -10dBV output (-10dB mode)
High Pass Filter..................................... single pole, 10-200 Hz adjustable
Power Requirements: ........................... USA – 105 to 125 VAC / 60 Hz Export units configured for
country of destination.
Dimensions: .......................................... 3.50” H x 19.0” W x 8.75” D
Weight:.................................................. 10.5 Lb.
To Next Page
Loading...
