EasyManua.ls Logo

Arthrex DrillSaw Mini 300 System - User Manual

Arthrex DrillSaw Mini 300 System
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
DrillSaw Mini 300™ System
User’s Guide
The Arthrex DrillSaw Mini 300™ System User’s Guide provides
safety operation information for all components of the
Arthrex DrillSaw Mini 300System, including accessories.
All operating personnel must read this User’s Guide
thoroughly, prior to using this system and follow all safety
warnings, cautions, and precautions.
0086
Arthrex, Inc.
1370 Creekside Blvd.
Naples, FL 34108-1945 USA
Toll Free: 1-(800) 934-4404
www.arthrex.com
Arthrex GmbH
Erwin-Hielscher-Strasse 9
81249 München, Germany
Tel: +49 89 909005-0
Fax: +49 89 909005-280
www.arthrex.de
DFU-0223-2
Revision 0
© 1/2019 Arthrex, Inc. All rights reserved
AR-300

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Arthrex DrillSaw Mini 300 System and is the answer not in the manual?

Summary

General Warnings and Safety Notices

Important Safety Conventions

Key safety precautions and usage guidelines for the device.

Symbol Definitions

Explanation of safety and operational symbols used in the manual.

Shipping, Unpacking, and Warranty Information

Procedures for handling the device upon receipt and warranty terms.

Product Description and Intended Use

Product Description

Overview of the battery-powered surgical instrument and its components.

Intended Use

Applications of the modular electric system in orthopedic and sports medicine.

Contraindications

Situations and uses for which the system is not recommended.

Set Composition

List of parts and accessories included with the DrillSaw Mini 300 System.

Product Functions

Identification and definition of the handpiece's operational features.

Technical Specifications

Handpiece

Detailed technical specifications for the AR-300 handpiece.

Attachments

Specifications for various attachments including drill, reamer, and saw.

Safety, EMC, and Regulatory Requirements

Compliance and safety standards for the device.

Electromagnetic Compatibility (EMC)

Information on device compatibility with electromagnetic fields.

Risks due to electromagnetic fields

Potential effects of electromagnetic fields on implantable medical devices.

Setup

How to Set Up the Handpiece

General guidance for preparing the handpiece for use.

Connecting and Removing an Attachment

Procedure for attaching and detaching accessories to the handpiece.

Connecting a Battery Housing

Steps to connect the battery housing to the AR-300 handpiece.

Removing the Battery Housing

Procedure for safely detaching the battery housing from the handpiece.

Quick Connect of Drilling and Reaming Attachments

Instructions for inserting drill bits into quick connect attachments.

Drilling and Reaming Attachments, Keyed Jacobs Chuck

Procedure for using drill bits with the keyed Jacobs chuck attachment.

Drilling and Reaming Attachments, Keyless Chuck

Procedure for using drill bits with the keyless chuck attachment.

Saw Attachment

Instructions for inserting sawblades into sagittal and reciprocating saw attachments.

Burr; Drill Attachments

Procedure for connecting burrs or drill bits to the attachment.

Wire;Pin Driver Attachment

Procedure for inserting pins or wires into the driver attachment.

Battery Housing;Pack;Transfer Plate

Procedure for inserting the battery into the battery housing.

Cleaning and Disinfecting

Battery Pack Cleaning

Guidelines for cleaning and disinfecting the battery pack, noting restrictions.

Preliminary Cleaning

Steps for initial cleaning of components before automated processes.

Automated Cleaning and Thermal Disinfection

Recommended parameters for washer-disinfector cycles.

Sterilization

Approved Sterilization

Recommended parameters and guidelines for steam sterilization.

Transmissible Spongiform Encephalopathy Agents

Precautions for handling instruments exposed to TSE agents.

Maintenance

Periodic Maintenance

Importance of inspecting the system and accessories before and after each use.

Technical Support

Additional Technical Information

How to obtain further technical information and support from Arthrex.

Repair Policy

End of Life, Environmental Directives

Electromagnetic Emissions

Arthrex DrillSaw Mini 300 System Specifications

General IconGeneral
Battery TypeLithium-ion
TypeOrthopedic surgical power tool
SterilizationAutoclavable
Power SourceBattery
Oscillation Speed0-20, 000 OPM (Oscillating Saw)
Cutting CapacityVariable depending on blade used
Weight1.1 kg
Battery LifeApproximately 1 hour of continuous use
Charging TimeApproximately 90 minutes
Blade OptionsSagittal saw blades, oscillating saw blades
ErgonomicsLightweight, balanced design with textured grip for precise control

Related product manuals