To Next PageTo Next Page
Need help?Do you have a question about the Arthrex Synergy AR-9800 and is the answer not in the manual?
Explains warnings and safety conventions following IEC standards.
Lists and explains symbols used on device labeling and documentation.
Details on how to unpack and inspect the device for shipping damage.
EU specific information regarding clinical benefits and risks.
Describes the Arthrex SynergyRF Generator as an electrosurgical device.
Details the intended use and situations where the device should not be used.
Overview of the AR-9800 console's physical features and components.
Details the front panel layout and its associated elements.
Details the rear panel layout and its associated components and ports.
Lists and explains various informational and error messages displayed by the AR-9800 console.
Provides detailed physical and electrical specifications for the AR-9800 console.
Specifies the recommended environmental conditions for operating the console.
Specifies the recommended environmental conditions for storing the console in its packaging.
Details the specifications for the SynergyRF footswitch.
Outlines the safety, electromagnetic compatibility, and regulatory compliance standards.
Graphical data showing output power and voltage characteristics under various conditions.
Provides guidance on the initial steps for setting up the console.
Details important safety precautions related to connecting and using the AC power supply.
Instructions and safety warnings for replacing the fuses in the AR-9800 console.
Information on the device's EMC performance and potential interference.
Step-by-step guide for the basic setup and connection of the AR-9800 console.
Instructions on how to connect and configure the footswitch for operation.
Guidelines for connecting and preparing the disposable ApolloRF probe for use.
Description of the AR-9800 console's main display screen and its elements.
Overview of the settings menu, providing access to various configuration options.
Interface for selecting the display language for the console.
Displays model, software versions, and build information for the console.
Allows users to confirm and reset console settings to factory defaults.
Options to enable or disable the ablation setting button on the probe handpiece.
Allows selection between footswitch-only or dual control modes.
Information on connecting and using the SynergyRF footswitch.
Details how the Ablate Power Change button on the footswitch functions.
Description and usage of accessory Arthrex ApolloRF devices (probes).
Describes the normal operating modes and timings for Ablation and Coag.
Step-by-step procedure for safely shutting down and disconnecting the system.
Instructions and precautions for cleaning and disinfecting the AR-9800 console.
Instructions and precautions for cleaning and disinfecting the footswitch.
Information on precautions for TSE agents and their resistance to sterilization.
Guidelines for regular inspection and upkeep of the SynergyRF System.
Information on how to obtain the Service Manual for detailed servicing.
Clarifies that annual calibration is not required but instructs on error messages.
Instructions for finding and displaying the console's software version.
A table outlining common faults, their causes, and recommended solutions.
Steps to take to resolve interference issues with other electronic devices.
Declares electromagnetic emissions compliance and guidance for use in different environments.
Specifications for system cables, including shielding and maximum length.
Provides guidance on electromagnetic immunity levels and environmental considerations.
Recommends minimum separation distances for RF communication equipment to prevent interference.
General| Brand | Arthrex |
|---|---|
| Model | Synergy AR-9800 |
| Category | Medical Equipment |
| Language | English |
