What to do if Arthrex AR-9600 Medical Equipment shows 'Output current out of specification' error?
If your Arthrex Medical Equipment displays an 'Output current out of specification' error, first turn the unit off, then turn it back on. If the error reappears, record the error code and contact Arthrex Customer Service.
What to do if my Arthrex Medical Equipment is overheating?
If the internal temperature of your Arthrex Medical Equipment exceeds the limit, turn the unit off and allow it to cool down for 20 minutes. Then, turn the unit back on. If the error code reappears, record the error code designation and contact Arthrex Customer Service.
What to do if Arthrex Medical Equipment shows a NEM circuit error?
If your Arthrex Medical Equipment is showing a NEM circuit error, turn the unit off, and then turn it back on. Should the error code reappear, record the error code designation and contact Arthrex Customer Service.
What to do if Arthrex AR-9600 shows a simultaneous activation error?
If your Arthrex Medical Equipment displays a simultaneous activation error, release the activated handpiece button or footswitch pedal (either Cut or Coag). If the error code reappears, record the error code designation and contact Arthrex Customer Service.
How to fix a stuck handpiece button or footswitch on Arthrex AR-9600 Medical Equipment?
If the cut handpiece button or footswitch on your Arthrex Medical Equipment is stuck, try the following: 1. Turn off, then turn on the generator, ensuring no buttons are pressed or accessory devices are activated during the self-test. 2. If the error persists, disconnect all accessories and restart the generator. 3. If the issue continues, replace the handpiece or footswitch and restart again. 4. If the error code reappears, record the error code designation and call Arthrex Customer Service.
Details the technological advancements and unique capabilities of the generator.
Lists the items included with the Arthrex O.P.E.S. Electrosurgical Generator.
Presents important warnings and cautions for safe operation of the generator.
Layout of controls, indicators, and receptacles on the front panel.
Explains symbols, preset, cut/blend, coag, and bipolar controls on the front panel.
Details the controls for setting and recalling user and factory presets.
Explains controls for adjusting Cut and Blend modes and power settings.
Details controls for adjusting Coag modes (Pinpoint/Spray) and power settings.
Explains controls for adjusting Bipolar mode power settings.
Describes indicators for power, return electrodes, and footswitch status.
Locates the unit power switch and front panel receptacles for accessories.
Illustrates the layout of connectors and symbols on the rear panel.
Provides instructions for visually inspecting and installing the generator unit.
Outlines tests to ensure proper operation of all modes and generator functions.
Ensures generator/accessories are ready and covers critical setup safety precautions.
Details steps for powering on, performing self-test, and initial configuration.
Instructions for preparing the generator and accessories for monopolar and bipolar surgery.
Explains the unit's memory feature for storing, recalling, and managing presets.
Details how to adjust blend settings for hemostasis control.
Explains the functionality of the last used preset memory feature.
Step-by-step guide on activating the generator and critical safety warnings.
Procedures for cleaning the unit and performing regular visual inspections.
Step-by-step instructions for safely replacing the generator's fuses.
Lists error codes, their descriptions, and recommended actions for resolving issues.
Details manufacturer responsibilities and the process for returning the generator for service.
Details input power, duty cycle, dimensions, operating parameters, and transport/storage conditions.
Specifies audio levels, return electrode sensing behavior, and leakage current limits.
Lists standards, EMC compliance, voltage transients, and maximum output power characteristics.
Graphical representation of output power versus load resistance for various modes.
Outlines the limited warranty periods and terms for Arthrex products.
General| Category | Medical Equipment |
|---|---|
| Model | AR-9600 |
| Manufacturer | Arthrex |
| Material | Stainless Steel |
| Sterility | Sterile |
| Name | AR-9600 |
To Next Page
