To Next PageTo Next PageWhat to do if my Arthrex DualWave console will not power up?
If the Arthrex Medical Equipment console won't power up, first check the AC mains power cord. If that's not the issue, try using a different power outlet. Also, inspect the AC mains fuses. If problems persist, the device may need to be returned to Arthrex for repair.
What to do if Arthrex DualWave Medical Equipment shows a Pressure Fault?
If the Arthrex Medical Equipment displays a 'Pressure Fault', ensure there is an adequate fluid supply. Also, try decreasing the outflow. Check the tubing for any damage, pinches, kinks, or blockages, and make sure the tubing connections are properly connected. If necessary, replace the tubing. If the issue continues, return the device to Arthrex for repair.
What to do if my Arthrex DualWave Medical Equipment does not pump when activated?
General| Category | Medical Equipment |
|---|---|
| Brand | Arthrex |
| Model | DualWave |
| Pressure Settings | Adjustable |
| Flow Rate | Adjustable |
| Application | Arthroscopic surgery |
| Portability | Portable |
| Modes | Continuous, Pulsed |
| Compatibility | Arthrex Fluid Management Accessories |
