Arthrex SynergyHD3 User Manual

950-0027-01B 52 of 55
IEC 60601-1-2 Table 6
Recommended separation distances between portable and mobile RF communications equipment and the
ARTHREX HD3 Video System
The ARTHREX HD3 Video System is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. The customer or the user of the ARTHREX HD3 Video System can help prevent
electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications
equipment [transmitters] and the ARTHREX HD3 Video System as recommended below, according to the maximum output
power of the communications equipment.
Rated maximum
output power of
transmitter [W]
Separation distance according to frequency of transmitter [m]
150 kHz to 80 MHz
80 MHz to 800 MHz
 
PEd 1/5.3
800 MHz to 2.7 GHz
 
PEd 1/7
0.01
0.12
0.12
0.23
0.1
0.37
0.37
0.74
1
1.17
1.14
2.33
10
3.70
3.70
7.37
100
11.70
11.70
23.3
For transmitters rated at a maximum output power not listed above, the recommended separation distance [d] in meters [m]
can be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output rating of
the transmitter in watts [W] according to the transmitter manufacturer.
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects, and people.
 
PVd 1/5.3

Arthrex SynergyHD3 Specifications

General

Brand	Arthrex
Model	SynergyHD3
Category	Digital Camera
Language	English