Thank you for you choosing ARTILLERY's products. For your convenience, please read this manual carefully before use, and strictly follow the instructions in the
manual to operate. We are always ready to provide the excellent seice to you.
No matter what problems you encounter during use, please contact us according to the phone number and email address which provided at the end of the manual.
To make you have a better experience with our products, you can also obtain equipment operation knowledge from the following ways:
Random instructions: you can nd relevant instructions and videos in the U-disk.
You can also log in the ocial website of ARTILLERY (www.aille3d.com) to nd information about hardware and software, contact information, equipment
operation, equipment maintenance, etc.
Concerning
1. Do not t any method which not described in the instructions to use this unit to avoid causing accidental personal inju and propey damage;
2. Do not place the machine in ammable and explosive materials or near a high heat source. Please place the machine in a ventilated, cool and dust-free environment;
3. Do not place the printer in an environment with high vibration or other instability, as shaking the machine can aect the printing quality of the printer;
4. It is advised to use the consumables which recommended by the manufacturer to avoid blockage of the extrusion head and damage to the machine;
5. Please do not use the power cable of another product during the installation process. Please use the power cable attached to the unit. The power plug must be connected to a three-hole
socket with a ground cable;
6. Do not touch the nozzle and hot bed while the printer is working to prevent high temperature burns and causing personal inju;
7. Do not wear gloves or entanglements while operating the machine to prevent moving pas from causing personal inju such as entanglement, compression, and cutting;
8. Use the remaining temperature of the nozzle to clean the consumables on the nozzle with tools after printing. Do not touch the nozzle directly with your hands during cleaning to prevent
burns;
9. Regularly maintain the product. Regularly clean the printer body with a d cloth when the power is o, and wipe o the dust, sticky printing materials, and foreign matter on the guide rail;
10. Children under the age of 10, please do not use this machine without supeision to avoid personal inju;
11. Users should follow the laws and regulations of the corresponding count and region where the equipment is located (where it is used), strictly follow the professional ethics, and pay
attention to safety obligations. It is strictly forbidden to use our products or equipment for any illegal purposes. We are not responsible for any relevant legal liability that violators should bear.
We are not responsible for any relevant legal liability that violators should bear.
12. In case of emergency, please turn o the power directly.
Instructions for use
To Next Page
Loading...
