3.6.2. Pattern-level features
3.6.2.1. Tempo
Each pattern can be saved with its own tempo setting, and as a result it is possible for a
song to contain a different tempo every time a different pattern is used.
But there is a front panel parameter that allows you to override these individual tempo
values: Global BPM. To activate this feature is simple: just hold the Shift button and press
Step button 15.
After this, every song and pattern in the DrumBrute will play at the same tempo, which you
may then set to whichever value you like as described in section [p.29].
3.6.2.2. Swing/Randomness
These features are described in greater detail in section [p.29]. When using them in Song
mode, keep in mind that any edits you make with the Swing and Randomness encoders
could reset to the Pattern mode values when a pattern boundary is crossed, if the next
pattern is from a different bank.
These parameters are always reset to the values stored when a bank change occurs.
Arturia - User Manual DrumBrute - Song Mode 28
To Next Page
Loading...
