5. COPY/ERASE FUNCTIONS
5.1. Copy Bank to Bank
The following procedure will overwrite all 16 patterns in the target bank. Be sure this is what you
want to do before you proceed.
It is possible to copy all 16 patterns from one bank to another bank.
Let’s say you want to copy the patterns from bank C into bank D. Here’s how:
• Press the Bank button.
• Select bank C by pressing Step button 3.
• Press the Copy button. Lots of buttons and pads will flash.
• Press the Bank button again. Step button 3 will flash, which means it is the bank
being copied.
• Select bank D by pressing Step button 4. That button will flash rapidly for about
a second.
When the flashing stops the process is complete. The source bank (bank C in this case) will
still be the selected bank.
Note: Just before selecting the destination you can see which is empty or not. Empty Banks will not
be lit up. Non empty ones will be lit up in red. This is also the case when you choose which Bank to
erase.
43 Arturia - User Manual DrumBrute - Copy/Erase Functions
To Next Page
Loading...
