Arturia DrumBrute - 6.2. Shortening a Pattern

6.2. Shorten a pattern
To make a 64-step pattern shorter uses a slightly different procedure. Let’s say you want the
pattern to be 48 steps long instead:
• Hold the Last Step button until the process is complete.
• Press the << button to select Step Group 3. The “48” LED will light.
• Still holding the Last Step button, press Step button 16. It will turn blue, which
means the pattern is now 48 steps long.
• If you want the pattern to be even shorter, start over and press the << button until
the proper Step Group is selected.
To select a pattern length other than a multiple of 16, use the Last Step button and press the
appropriate Step button to define the final step in the pattern. This process is described in
section [p.41].
47 Arturia - User Manual DrumBrute - Advanced Features