Aruba AP17 User Manual

Aruba Instant On AP17 Access Point
Installation Guide
Rev 02 | December 2019 1
The Aruba Instant On AP17 access points support IEEE 802.11ac standards for high-performance WLAN, and are
equipped with two radios, which provide network access and monitor the network simultaneously. Multiple-in,
Multiple-out (MIMO) technology allows these access points to deliver high-performance 802.11n 2.4 GHz and
802.11ac 5 GHz functionality, while also supporting 802.11a/b/g wireless services.
Package Contents
 1 x AP17 access point
 1 x Wall mount bracket (solid surface)
 1 x Cable gland
 1 x Copper lug
 1 x M4x6 screw
 1 x M6x45 screw
Hardware Overview
Figure 1 AP17 Access Point
Inform your supplier if there are any incorrect, missing, or damaged parts. If possible, retain the carton,
including the original packing materials. Use these materials to repack and return the unit to the supplier if
needed.
Grounding Point
Ethernet Port
Air VentReset button and LED

Aruba AP17 Specifications

General

Category	Wireless Access Point
Wi-Fi Standards	802.11a/b/g/n
Frequency Bands	2.4 GHz, 5 GHz
Antenna Type	Integrated
Ethernet Ports	1 x 10/100/1000 Mbps
Power Options	PoE

Summary

Package Contents

Hardware Overview

LED Status Indicators

Details the meaning of the AP's LED status lights.

Reset Button Functions

Instructions for resetting the AP to factory defaults or controlling the LED display.

Ethernet Ports and Pin-Out

Information on the Gigabit Ethernet port, its pin-out, and PoE capabilities.

Grounding Point

Procedure for properly grounding the access point for safety.

Before You Begin

Installation Location Considerations

Choose locations close to the center of coverage, free from RF absorbers/reflectors.

RF Interference Sources

Identify RF absorbers, reflectors, and interference sources like concrete, metal, and microwaves.

Outdoor Deployment Planning

Evaluate the environment for successful outdoor WLAN deployment and optimal RF coverage.

Access Point Installation

Grounding the AP

Procedure to connect the grounding wire to the AP using a copper lug and screw.

Powering the AP

Steps to connect the AP to a PoE injector via Ethernet cable, including gland installation.

Post-Installation Verification

Verify Connectivity with LED

Use the integrated LED to confirm the access point is receiving power and initializing.

Mobile Application Setup

Download and install the Aruba Instant On mobile app to complete setup.

Log in to Instant On Portal

Set up the access point via a web browser by logging into the Aruba Instant On portal.

Specifications and Compliance

Electrical and Environmental Specs

Details on power consumption, Ethernet interface, and operating/storage temperature/humidity.

Regulatory Model Number

Provides the specific regulatory model number for the AP17 access point.

Safety and Regulatory Compliance

Information on RF radiation exposure limits and general safety compliance statements.

Regulatory Information

FCC and Industry Canada Compliance

Details FCC and Industry Canada rules, conditions for operation, and interference measures.

Professional Installation Requirements

Specifies that the product requires installation by qualified personnel with RF knowledge.

EU and Wireless Channel Restrictions

Information on EU Declaration of Conformity and country-specific wireless channel restrictions.

Country-Specific Regulations

Summarizes regulatory information for Japan, Mexico, Morocco, Russia, Kazakhstan, and Taiwan.

Additional Country Compliance

Details compliance for Ukraine, Hong Kong, Philippines, and Singapore.

Support and Legal Information

Contact Aruba Information

Provides contact details for Aruba's main site, support, and community.

Copyright and Open Source

Copyright notice and information regarding open source code licensing.

Warranty Information

Details on the hardware product warranty and where to find more information.