Callout
Number
C2000 Port/Component
6 UID (Unit ID)
The UID LED helps you identify and locate a system, especially in high-density rack
environments. Additionally, the UID is used to indicate that a critical operation is
underway on the host, such as Remote console access or ROM flash.
The "current state" (on or off) of the UID is the last state chosen using one of these
methods. If a new state is chosen while the UID is blinking, this new state becomes
the current state, and takes effect when the UID stops blinking.
NOTE: The Unit ID Light web page does not automatically refresh itself if the state
of the actual light changes after the page is loaded. To ensure the page accurately
reflects the state of the UID Light, click on the Virtual Indicators link to update the
page.
7 Power Supply
8 Optional redundant Power Supply
You can also access the ClearPass hardware appliance by connecting a monitor and keyboard to the hardware
appliance.
Table 3 provides the specifications for the ClearPass C2000 hardware appliance.
Table 3: ClearPass C2000 Appliance Specifications
ClearPass C2000 Appliance Specifications
Hardware Model HPE DL20 Gen 9
CPU (1) Xeon 3.5Ghz E3-1240v5 with four cores (8 Threads)
Memory 16 GB
Hard drive storage
l (2) SATA (7.2K RPM) 1TB hard drive
l RAID-1 controller
Out-of-Band management HPE Integrated Lights-Out (iLO) Standard
Serial Port Yes: Virtual Serial via iLO
Performance &Scale Please refer to the ClearPass Scaling & Ordering Guide
Form Factor
Rack mount
l 1U SFF Easy Install Rail
l 1U Cable Management Arm
ClearPass 6.7 Getting Started Guide 10
To Next Page
Loading...
Need help?
General
