Aruba ClearPass Policy Manager C3000 User Manual

CLI Task Examples
View the Policy Manager Data and Management Port IP Address and DNS Configuration
[appadmin]#show ip
Reconfigure DNS or Add a New DNS
[appadmin]#configure dns <primary> [secondary] [tertiary]
Reconfigure or Add Management and Data Ports
[appadmin]#configure ip <mgmt | data > <ipadd> netmask <netmask address> gateway <gateway
address>
Parameter Description
ip <mgmt|data> <ip
address>
l Network interface type: mgmt
(management) or data
l Server IP address
netmask <netmask
address>
Netmask to be applied to the network
interface and server IP addresss
gateway <gateway
address>
Gateway IP address
Configure the Date
Configuring the time and time zone is optional.
[appadmin]#configure date –d <date> [-t <time>] [-z <timezone>]
Configure the Host Name for the Node
[appadmin]##configure hostname <hostname>
Join the ClearPass Policy Manager Appliance to the Active Directory Domain
If you are using Active Directory to authenticate users, be sure to join the ClearPass Policy Manager appliance
to the Active Directory domain.
[appadmin]#ad netjoin <domain-controller.domain-name> [domain NetBIOS_name]
Flag/Parameter Description
<domain-controller.domain-name> Required. This is the name
of the host to be joined to
the domain.
NOTE: Use the Fully Qualified
Domain Name.
[domain NetBIOS name] Optional.
ClearPass 6.7 Getting Started Guide 60

Aruba ClearPass Policy Manager C3000 Specifications

General

Brand	Aruba
Model	ClearPass Policy Manager C3000
Category	Server
Language	English