Aruba JL262A - Chapter 1 Introducing the 2930 F Switches

The Aruba 2930F are multiport switches that can be used to build high-performance switched networks. These
switches are store-and-forward devices offering low latency for high-speed networking. The 2930F switches also
support Power over Ethernet (PoE/PoE+) technologies and full network management capabilities.
These switches are described in this manual:
Non-PoE switches PoE+ switches
Aruba 2930F 24G 4SFP+ Switch (JL253A) Aruba 2930F 24G PoE+ 4SFP+ Switch (JL255A)
Aruba 2930F 48G 4SFP+ Switch (JL254A) Aruba 2930F 48G PoE+ 4SFP+ Switch (JL256A)
Aruba 2930F 24G 4SFP Switch (JL259A) Aruba 2930F 24G PoE+ 4SFP Switch (JL261A)
Aruba 2930F 48G 4SFP Switch (JL260A) Aruba 2930F 48G PoE+ 4SFP Switch (JL262A)
Aruba 2930F 8G PoE+ 2SFP+ Switch (JL258A)
Aruba 2930F 24G PoE+ 4SFP+ TAA Switch (JL263A)
Aruba 2930F 48G PoE+ 4SFP+ TAA Switch (JL264A)
Aruba 2930F 48G PoE+ 4SFP 740W Switch (JL557A)
Aruba 2930F 48G PoE+ 4SFP+ 740W Switch (JL558A)
Aruba 2930F 48G PoE+ 4SFP+ 740W TAA Switch
(JL559A)
This chapter describes these switches with the following information:
• Front of the switches:
◦ Network ports
◦ Management ports
◦ LEDs
◦ Buttons
• Back of the switches:
◦ Power connectors
• Switch features
The drawings in this publication are for illustration only and may not match your particular 2930F
switch model.
Chapter 1
Introducing the 2930F switches
Chapter 1 Introducing the 2930F switches 5