Arylic Up2Stream Pro - How to Use Up2 Stream Pro; Download and Install 4 STREAM App; Device Connection Methods; Bluetooth Pairing and Usage

6. Specication
5.1 App download
Download the 4STREAM application from App Store for iOS based devices and Google Play Store for
Android based devices.
The application supports English, Spanish, French, German, Italian, Portugese, Korean, Simplified
Chinese,Traditional Chinese and Japanese
5. How To Use
5.2 Connection
1. Power the device.
2. Direct Mode: If you don’t have router, please choose direct mode, then you
can play your music from your storage from 4STREAM app .
3.Network Mode : Connect your phone to SoundSystem WiFi.
3.1. Go for mobile device WLAN settings> Connect
mobile device to WiFi hotspot SoundSystem_xxxx you will see a WiFi logo
.
(short press the reset button if the Wi-Fi hotspot is not found)
3.2. Open the 4STREAM application, follow the guides
3.3 Choose the 2.4G network( rst time connection require connect your router
2.4G channel), enter router password>wait for the device to be congured.
* For multiple units connecting to same router, router password will be saved .
*If change router or router password, please press WiFi reset button on the
product .
5.3 Connection via LAN
Plug in the wired cable to the RJ45 Ethernet, the device will show on the app in about 10 seconds. (Note: the cell phone and the device must
be in the same network)
*Attention for Android users
Different brand mobile phones may ask you to allow
to use SoundSystem WiFi network, please choose
yes, if not, you may not able to set up successfully .
It may also ask you to authorize other things, please
choose yes or it may affect your use.
Connectivity
Wireless network IEEE802.11 b/g/n 2.4G
Ethernet Single 10/100M RJ45
Bluetooth 5.0,SBC/AAC
USB Host Play USB music
Bluetooth Distance 10M
Power Input *
5V-1A/2 pin connector
5V-1A micro USB input
Audio output
Analog 3.5mm/4 pin connector
Digital IIS
SPDIF
Frequency response 20Hz to 20kHz
Audio Input Analog 3.5mm/4 pin connector/Mirco USB
SNR 91dB
THD 0.03%
Music Format FLAC/MP3/AAC/AAC+/ALAC/APE/WAV
Decoding Up to 24bit/192kHz
Protocols AirPlay, DLNA, UPnP, Spotify Connect, Qplay
Dimensions
87.6*49.6*15mm
Accessory
4Pin 220mm 2.0 Cable,Internal WiFi Antenna
220mm,7Pin 220mm 2.0 Cable, 2Pin 220mm
Power Cable, User Manual
* Warning: Up2Stream Pro must use 5V-1A DC input, higher voltage power supply may damage the board.
Scan the QR codes below for more
www.arylic.com
Complete User Manual
Support: info@arylic.com
4STREAM App Facebook
:
arylicme YouTube:Arylic
The application will notify you in app when there is a
new rmware version available.It's recommended to
update rmware whenever available as this might not
only correct bugs or improve security,but also can
add new features or services.
5.7 Firmware update
Up2Stream Pro V3.1.0
Connect the Up2Stream Pro to your PC with USB cable (make sure it’s a data cable including the
signal wires). The PC will automatically discover a USB sound card, and when you activated it as the
system main output, the PC will send the audio output over Up2Stream Pro in digital (44.1KHz/16bits).
You can stream to other Up2Stream devices over multiroom connection.
NOTE: there’s about 3 seconds delay for multiroom slave devices.
5.5 USB audio
To use bluetooth ,please swtich to bluetooth via
app or by remote controller,then find bluetooth
device SoundSystem_XXXX from your phone
bluetooth setting and pair it .
5.4 Bluetooth
Connect the Up2Stream device to your PC with USB cable (make sure it’s a data cable including the signal wires). And open
the program Up2Stream DSP Tool (only support Windows.), and you can tune audio effects conveniently, including Music Noise
Suppressor, Virtual Bass, Stereo Widener, Exciter, 10 bands EQ, etc. After editing the audio effects, you can save the changes to the
device so the tuned effects will remain. You can get more information from our website www.arylic.com
，
or from the Up2Stream
DSP Tool manual.
5.6 Up2Stream DSP Audio Effects Tool (Sell Separately)