ASA Electronics iN-Command NCSP3 - Settings Configuration; General Settings and Options

NCSP3
11
• PASSCODE PROTECTION
Conrm the new passcode.
• Text Editing
• SETTINGS
1. Select “Settings”
From the Menu screen you can:
• Edit iN-Command function text
• Reposition functions
• Enable/disable functions
• Change the switch properties (from momentary to latch)
• See the status of iN-Command
• Connect devices with Bluetooth
• Change the passcode
• Reset the oor plan
• Control the brightness of the DC screen
• View IN-Command’s Legal documents and customer
support information.
The Setup button is used by the manufacturer.
A passcode is required to access the system.
On the rst time use of the system, the user is required to enter
and conrm a new passcode.