Need help?Do you have a question about the ASA Electronics iN-Command NCSP3 and is the answer not in the manual?
General| Brand | ASA Electronics |
|---|---|
| Model | iN-Command NCSP3 |
| Category | Measuring Instruments |
| Language | English |
Safety warnings for operation, adult use, line of sight, alcohol, moisture, and accessories.
Lists the primary capabilities and functions of the iN-Command system.
Important guidelines to follow before operating the iN-Command system.
Lists all the items included in the product packaging.
Lists required tools and materials for installing the iN-Command system.
Safe steps to disconnect the vehicle's battery before installation.
Guidance on choosing an appropriate installation location for the Display Commander.
Instructions for physically mounting the Display Commander unit.
Details the wiring diagram and connections for the Body Control Module (BCM).
Illustrates the main categories and functions accessible through the setup menu.
Explains the Travel Lockout feature for transit and how to engage/disengage it.
Describes the operation of the override switches on the Body Control Module for manual control.
Lists operating voltages, current draws, dimensions, and versions of the system components.
Provides FCC compliance notices, warnings, and RF exposure information.
Overview of available settings for customization and system management.
Instructions for editing text labels and reordering items in system lists.
Configuring system triggers, generator fuel type, and alarm inputs.
Initial setup, changing, clearing, and timer settings for system passcode protection.
Information on checking device compatibility and using the iN-Command mobile app.
Guides on enabling Bluetooth and initiating the pairing process with the DC.
Steps for scanning for devices and confirming pairing requests on DC and mobile.
How to view paired devices and connect to the DC from a mobile device.
Options to restore previous floor plan settings or reset to factory defaults.
How to view the status of active Bluetooth sessions and connected devices.
Explains operation of vent fans and the fan-only HVAC setting.
Details on selecting cooling mode and adjusting temperature and fan speed.
Guides on selecting heating, auto modes, and adjusting associated settings.
How to set temperature and time schedules for HVAC operation.
Steps to activate and use the Auto Generator Start feature.
How to set specific start and stop times for the generator operation.
How the Date & Time feature is used for scheduling Generator and HVAC functions.
Instructions for updating the floor plan, DC OS, and App versions via USB.
Lists specific file names needed for software updates and the correct update order.
Steps to update the Display Commander's Operating System and Body Control Module.
How to update the iN-Command mobile application and load a floor plan.
Options to restore previous floor plan or factory default settings.
Step-by-step guide to calibrate the touch screen display for accurate input.
How to access administrator settings for advanced calibration and data management.
Procedure for setting resistor reference values to calibrate water tank sensors.
Setting generator hour meter and clearing current app data.
Provides solutions for common problems like no power, screen flashing, and non-responsive components.
To Next Page