08 October 2018 / Ver. D 10
TD 93272EN
Installation Guide
Application server
Screw the Application Suite with screws to the 19inch rack as shown below.
Note: Screws for fastening the assembly brackets in the rack are not included in
the delivery.
4.3 Supply Voltage
The Application Suite uses a primary power supply (100-240 V AC).
• Connect supply voltage to the 100-240V AC jack.
Figure 4. 100-240V AC socket on the rear
4.4 Connections
4.4.1 Ethernet Ports
The Application Suite has a 10baseT/100baseT Ethernet modular jack (RJ45) for
connection to the network, this port is labelled “ETHERNET”.
The Application Suite has 2 additional jacks (RJ45), labeled Port A and Port B. These are for
future use.
Figure 5. Detail of the connections on the front
To Next Page
Loading...
