08 October 2018 / Ver. D 12
TD 93272EN
Installation Guide
Application server
7 Click “Install this driver software anyway”. The installation of the port
driver begins.
8 Click “Close” when the installation has finished.
The port driver “Linux USB Ethernet/RNDIS Gadget” is now installed in Control Panel >
Hardware and Sound > Devices and Printers > Device manager > Network adapters.
4.6 Basic Configuration
The Application Suite needs to be configured with basic settings. The parameters are set
from the application’s configuration pages.
4.6.1 Log in to the configuration settings
1 Access the Application Suite via the network using the IP-address and the “config”-
extension: “xxx.xxx.xxx.xxx/config”.
To Next Page
Loading...
