ASCOM NISM2 User Manual

08 October 2018 / Ver. D 13
TD 93272EN
Installation Guide
Application server
Login with user “admin”, password “changeme”.
Note: user “admin” and “changeme” are the default settings
The Status Page will show up first.
4.6.2 Changing the network settings
1 Access the Application Suite via the network using the IP-address and the config
extension: “xxx.xxx.xxx.xxx/config”.
2 Login with user and password
3 Select ‘Network Setting’ to change Network specific settings:

ASCOM NISM2 Specifications

General

Brand	ASCOM
Model	NISM2
Category	Server
Language	English