08 October 2018 / Ver. D 17
TD 93272EN
Installation Guide
Application server
1 Access the Application Suite via the network using the IP-address and the config
extension: “xxx.xxx.xxx.xxx/config”.
2 Login with user and password
3 Select ‘Configuration Sections’ to change locale settings.
4 Select ‘Locale Settings’:
Locale Settings: e.g. English - UNITED STATES OF AMERICA
5 Select the language
6 Click ‘Save’ to save the settings.
4.6.6 Uploading a new language file
The language file and online help file can be uploaded to the Application Suite.
The translation file and online help file are separate and do not need to be uploaded at
the same time.
1 Access the Application Suite via the network using the IP-address and the config
extension: “xxx.xxx.xxx.xxx/config”.
2 Login with user and password
3 Select ‘Configuration Sections’ to change locale settings.
To Next Page
Loading...
