ASCOM NISM2 User Manual

08 October 2018 / Ver. D 8
TD 93272EN
Installation Guide
teleCARE IP
separate application documentation. The application GUI is the web user interface for the
software application running on the Application Suite.
3.2.2 Boot Mode
Placing the module in Boot Mode is performed manually by the user but if the module
detects several major errors, the module can place itself in Boot Mode, refer to Chapter 5,
“Boot Mode,” on page 26.

ASCOM NISM2 Specifications

General

Brand	ASCOM
Model	NISM2
Category	Server
Language	English