Need help?Do you have a question about the ASCOM PCR Charging Rack and is the answer not in the manual?
General| Brand | ASCOM |
|---|---|
| Model | PCR Charging Rack |
| Category | Battery Charger |
| Language | English |
Device compliance with FCC rules, operational conditions, and policy on unauthorized modifications.
Details module configuration limits and how to connect Charging Racks using modular cables.
Covers mounting orientation for Power Supply and Charging Rack modules, and wall fitting preparation.
Steps for removing module covers, joining modules, and final assembly tasks.
Instruction to unscrew and remove the voltage safety cover from the Power Supply module.
Steps for preparing, routing, and connecting the mains power supply cable.
Instruction to mount and fasten the voltage safety cover back onto the Power Supply module.
Guidance on mounting the cable support holder on the Power Supply module.
Advice on routing the +5 V DC supply voltage cable around cable supports to prevent breakage.
Instruction to connect the +5 V DC supply voltage connector to the J3 terminal.
Detailed steps for connecting, configuring, and performing a software upgrade on the Master PCR-M.
Instruction to connect the mains power supply cable to the wall socket.
Procedure to test charging slots by inserting portables and observing LED status.
Explanation of the meaning of different LED color and flashing patterns.
Description and function of connectors (J403, J405, J100, J303, J400/J401) and switches (SW300, SW402, SW400) and fuse (F100).
Details on configuring SW400 for operation modes and SW402 for A-bus addressing.
To Next Page