ASD Document 600541 Rev. G 44 TerraSpec® User Manual
www.asdi.com Appendix A Troubleshooting
• Do a ping test to make sure the spectrometer is responding.
» Open up a command window by select Start->Run
»Type cmd in the Run window.
» Select OK to open the window.
» For an Ethernet connection, type:
ping 10.1.1.11
» For a wireless connection, type:
ping 10.1.1.77
The default IP Address for the ASD spectrometer is:
•
10.1.1.11
for the Ethernet interface, or
•
10.1.1.77
for the wireless interface.
Figure A-1 Run window with cmd.
Figure A-2 Successful result of a ping operation.
To Next Page
Loading...
