Need help?Do you have a question about the ASD FieldSpec 3 and is the answer not in the manual?
General| Spectral Range | 350-2500 nm |
|---|---|
| Scan Time | 100 ms |
| Sampling Interval | 1.4 nm @ 350-1000 nm, 2 nm @ 1001-1800 nm, 2 nm @ 1801-2500 nm |
| Data Output | Digital (RS-232, Ethernet) |
| Detectors | VNIR (350-1000 nm), SWIR 1 (1000-1800 nm), SWIR 2 (1800-2500 nm) |
| Field of View | 25° |
| Operating Temperature | 0 to 40°C |
| Storage Temperature | -20°C to 50°C |
Step-by-step instructions for safely removing the instrument from its shipping case.
Instructions for safe handling and use of light sources, including warnings about heat.
Emphasizes the importance of proper ventilation to prevent overheating and data corruption.
Describes the construction of fiberoptic cables and provides important warnings about handling and storage.
Details the properties of NiMH batteries and essential care practices for longevity.
Instructions on how to properly pack the spectroradiometer and its components for shipping.
Step-by-step guide for configuring the RS3 software for measurements.
Offers steps to resolve general communication errors, including power cycling and checking connections.
Guides on how often to collect a white reference, both indoors and outdoors.
Details how to enable and configure GPS functionality within the RS3 application.
Provides expected battery life for NiMH and Gel Cell batteries under various operating conditions.
Lists phone, fax, email, and web resources for obtaining technical support.
To Next Page
