14
♦ Galloni experience has designed a line of graphite and ceramic crucibles to be used in the electronic
centrifugal casting machine mod. MODULAR 6. Their quality is superior:
–
in their compatibility with the alloys on the market
–
in their shape which optimizes the result of the casting pieces.
♦ The crucible is an integral part of the electronic casting machine, therefore it is imperative to use the Galloni
original crucibles to prevent the machine from being jeopardized.
♦ During heating the crucible might release gases or substances which affect the alloy: the careful use of Galloni
crucibles ensures the original purity of the alloys.
♦ Warranty fails if non original crucibles are used.
♦ Store crucibles in a dry place.
♦ Crucible production presents different technical difficulties also in connection with the materials which cannot
always be of the same quality and therefore the constant crucible life cannot be guaranteed.
♦ ATTENTION: Do not put the sprue button of the previous casting in the crucible in such a way that the button
edge is wedged against the crucible sides because during heating its expansion will cause the crucible to break.
♦ ATTENTION: When the crucible is hot it becomes brittle. Avoid pressing with the steel rod on the metal
pieces settled in the crucible.
–
A100.481 Highly resisting silicon nitride ceramic crucible for chrome-cobalt-molybdenum (100 gr)
– A100.425 Ceramic crucible for chrome-cobalt-molybdenum (100 gr).
– A100.059 Special graphite crucible for precious alloys (80 gr) up to 1450 °C.
– A100.460 Sinter crucible in glass carbon for all alloys containing over 30% palladium (80 gr) or
normal precious alloys.
CRUCIBLES
A100.059
A100.460
A100.425A100.481
MODULAR 6
To Next Page
Loading...