Ashly NE8250 - NE Multichannel Amplifier Series and Options; Series Overview and Model Identification; Factory Installed Options Details; Amplifier Protection Features

2.3 Powering Up the Amplifier
Important: Complete section 2.1. Setup Procedure before proceeding with this section.
When turning on the amplifier for the first time, follow the steps below.
1. Turn down the levels on the front panel.
2. Turn on the Power switch. The power indicator should illuminate after a short boot up
sequence.
3. Once the amplifier is connected to the network and powered up, use the RMS ACENet page
to complete the amplifier configuration.
4